Supplies
- Cotton Ribbon or Fabric Cut Into Strips
- Rit All-Purpose Liquid Dye in desired colors
- Rit ColorStay Dye Fixative
- Small jars or containers for dyeing, three
- Small mixing spoon
- Measuring Spoons
- Paper towels
- Plastic table cover
- Salt
Time
Total: {{ partial.t24F.total }}
Difficulty
Beginner Total: {{ partial.tVRF.total }}
Instructions
- Prewash fabric to remove any finishes that may interfere with dye absorption. Leave
- Fill small jars with about 4 cups of very hot water. Shake dye bottle before pouring. Wearing gloves, add 1 to 2 tablespoons of your favorite Rit All-Purpose Liquid Dye. Stir well. Repeat to create three small dyebaths.
- Fold cotton ribbon strip until it’s roughly 12” long.
- Dip 1/3 of the folded ribbon into the first dyebath. Place the bottom 1/3 of the folded ribbon into the third dyebath. Place second dyebath between the first and third. Set the middle of the folded ribbon into the dyebath and allow the dye to absorb upwards—this is what will create a seamless ombre.
- Once desired color and ombre are achieved, remove ribbon from dyebaths.
- To set the dye, do the following right after applying the dye:
- Apply Rit ColorStay Dye Fixativewith a spray bottle, which will enhance the colors and reduce bleeding. Mix 2 tablespoons of well-shaken ColorStay Dye Fixative with water and apply liberally to both sides of the ribbon.
- Rinse in cold water until rinse water begins to run clear. Then let dry.
Posts You May Like
